I am trying to troubleshoot a throttle issue with a EZGO which I believe is a PDS. It has tow/run switch but has a F/R like I have never seen on an EZGO which is one unit behind the lever you move with your hand which has 2 micro switches on the sides. Anyway from a stop when you press the gas pedal down all the way the cart goes full speed however when you let off the pedal and push it down again it goes very slow. So basically it is either full speed or slow no in between. Im not sure how the controller gets the throttle signal on these carts because I am more familar with CC. So I tried checking for ohms at the ITS between white and black wires in pedal box but nothing happened. On volts setting there was 12V and change there but I didnt have a jack to get the wheels off the ground at the time to check with pedal down. If anyone can point me in the right direction for how to troubleshoot the throttle I would appreciate it.
↧