So I got most of my new controller and solenoid installed, along with new 2 gauge cables from the motor. However, I am kind of stuck on a couple of things.
Cart is a 1996 EZGO TXT DCS
1- The small diode. Does this go on the (-) connectors since the larger diode connects to the positive posts?
2 - I have these non-connected wires left. Struggling with where/how these are connected. FYI, the two red came off of the posts on the old solenoid.
As always, thanks in advance!
Cart is a 1996 EZGO TXT DCS
1- The small diode. Does this go on the (-) connectors since the larger diode connects to the positive posts?
2 - I have these non-connected wires left. Struggling with where/how these are connected. FYI, the two red came off of the posts on the old solenoid.
As always, thanks in advance!