Just finished Jakes 3" lift with 22" tires - install went smooth. I noticed that that the cart was not level (when looking at the back from a distance). Sure enough when I measured the distance from the floor to the top of the rear wheel well, the driver side is ¾" lower than the passenger side.
When looking underneath, there does not appear to be anything hung up and I noticed that the coil-overs are not adjustable so I am scratching my head how to adjust this ¾" height difference.
.... what looked odd was the horizontal bar (spacer) that is welded between the two round frame tubes (at rear of cart). This cross bar is not straight.. seems to bend around the transaxle. I am wondering if perhaps the frame is bent and this is what is throwing off my ride height?
Can someone confirm if their bar is straight or not? Also ... does anyone know if the heavy duty G29 shocks that most aftermarket companies are selling have adjustable spring height?
tx
When looking underneath, there does not appear to be anything hung up and I noticed that the coil-overs are not adjustable so I am scratching my head how to adjust this ¾" height difference.
.... what looked odd was the horizontal bar (spacer) that is welded between the two round frame tubes (at rear of cart). This cross bar is not straight.. seems to bend around the transaxle. I am wondering if perhaps the frame is bent and this is what is throwing off my ride height?
Can someone confirm if their bar is straight or not? Also ... does anyone know if the heavy duty G29 shocks that most aftermarket companies are selling have adjustable spring height?
tx