I have a 98 ezgo pds cart with a alltrax dcx 400 controller that was put in the first part of last year. It recently started having a problem with the cart in reverse. The cart works fine in forward but when in reverse the coil will not pick up and I'm getting a low voltage alarm on the controller. I have checked the voltage on pins 6,7,9 and 10 and it is good with the key on and the switch in reverse. When the peddle is pressed with the switch in reverse i am getting full voltage (b-) on the blue wire side of the solinoid but I am losing b+ voltage on the yellow wire side of the solinoid (38.5v down to 15v). I am not having this problem with the switch in forward. I am stumped and could use some assistance. Thanks in advance.
↧