Hey everybody,
Yes, I have read where it says to connect the blue wire to the red wire during the reversing contactor installation. Problem is, I completely gutted out the cart, and performed a 36 to 48 volt conversion at the same time, with an SPM48500EZ, reversing contactor, and voltage converter . Although I have the wiring diagram, I have the blue wire from the key switch not connected to anything. I don't know what I need to connect it to. I currently don't get any light on the SPM48500, and no clicking of the solenoid, or the contactor.
Thanks for any help.
I am guessing that this is the "Blue wire" that is supposed to be connected to the red wire.
I just need to know where that **** "Red wire" ended up hiding.
In other words, What the hell do I attach the blue wire to?
Yes, I have read where it says to connect the blue wire to the red wire during the reversing contactor installation. Problem is, I completely gutted out the cart, and performed a 36 to 48 volt conversion at the same time, with an SPM48500EZ, reversing contactor, and voltage converter . Although I have the wiring diagram, I have the blue wire from the key switch not connected to anything. I don't know what I need to connect it to. I currently don't get any light on the SPM48500, and no clicking of the solenoid, or the contactor.
Thanks for any help.
I am guessing that this is the "Blue wire" that is supposed to be connected to the red wire.
I just need to know where that **** "Red wire" ended up hiding.
In other words, What the hell do I attach the blue wire to?