This is my first post and I am new here, so if Im posting in the wrong section let me know. Here is what I have and the issue that I'm having. I have a 1994 ezgo medalist 36v series cart. Batteries are 1 year old. I recently installed a 6 inch lift kit and tires. The cart looks sweet but I was unhappy with the torque up hill, so I figured it was time to beef up the components and motor. Yesterday, I installed a new Alltrax SPM 48500 controller, heavy duty solenoid, heavy duty f/r switch, D&D 170-010-0002 speed and torque motor, and heavy duty cables. I powered the cart up after installing everything and the cart didn't move an inch. I looked at the controller and noticed the Led indicator light was blinking 2 green lights followed by 3 red lights when I push the gas pedal down approx 1 inch. I looked in the manual and it says that error code means high throttle over range. If I push the gas pedal all the way to the floor, the led indicator light on the controller will turn solid green. I have no idea what that means or how to fix it. I'm hoping someone here can point me in the right direction. Thanks in advance.
↧