Hey Guys...
We have a 2000 EZGO 36v cart and researched our non moving cart and figured the solenoid was bad. The old one clicked but we were having intermittent issues with the cart not moving then it would for a while. We could wiggle the F/R switch and get it to go or tow it a few feet and it would go again. Well the solenoid is new (from EZGO), we placed the old diode and resister on the new solenoid and it still won't go... Can it be the old diode and resistor? We get voltage to the F/R switch but not really sure what we are looking at. We get 38+ volts to batteries and each battery reads 6+ volts...
Any help appreciated.
We have a 2000 EZGO 36v cart and researched our non moving cart and figured the solenoid was bad. The old one clicked but we were having intermittent issues with the cart not moving then it would for a while. We could wiggle the F/R switch and get it to go or tow it a few feet and it would go again. Well the solenoid is new (from EZGO), we placed the old diode and resister on the new solenoid and it still won't go... Can it be the old diode and resistor? We get voltage to the F/R switch but not really sure what we are looking at. We get 38+ volts to batteries and each battery reads 6+ volts...
Any help appreciated.