The spacer between the carb and motor has broken for the second time on my G14. I had put a cone filter like the one shown . I noticed the filter was moving a good bit . Do you think the filter sticking straight out causes the plastic spacer to crack and eventually break off ? The cart runs a lot better with it being I have Plowmans larger jets in the carb . He recommended just taking the foam outer filter off the inner one but I had to see how a more open filter would work . With this second spacer breaking I may just put the stock housing back on . Seems the pipe on top may give more support to the carb and not let the spacer to break. What is your thoughts ?
↧